HAKO Hakomatic B45 Instruction Manual page 39

Maintenance and Service
Hako-System Maintenance I
The following maintenance woks are to
be performed by an authorised Hako
Service workshop.
To be performed
Check battery charger
Check tank lid sealing of the soiled water tank and replace if required
Check function of bailsystem and operating panel
Check drain hose of the soiled water tank and replace if required
Grease joints at the brush lift-out
Check wheel fixing screws and tighten (10 Nm) if required
Check condition of tyres
Grease joints at the squeegee holder
Test drive and function test
Interval
every 125 hours of operation
o
o
o
o
o
o
o
o
o
39