Simatic Rf680M Mobile Reader - Siemens SIMATIC RF680M Operating Instructions Manual

Advanced functions
10.4 System reset
Performing a system reset and importing a back-up file
You can activate a system reset via "Start > Shutdown > Cold Reset". The most recently
saved back-up file will then be copied back in. Please note that during a "Cold Reset", the
device restarts twice.
To restore a backup, replace all the data in the "FlashDisk" directory with your backup copy
and then run a system reset.
Note
Data retention and data loss during system reset
When you perform a system reset, only the saved data in the flash memory are retained
("Flash Disk" directory). All other data in RAM (e.g. in the "Application Data" folder) is lost.
Note
Restoring the delivery status of the device
If you want to restore the delivery status of the device, delete the self-stored files in the
"Flash Disk" directory, especially the self-created back-up files with the ending *.pfl.
Ensure that the "Flash Disk" directory still contains the files that were supplied on delivery
(especially the files with the ending *.pfl). Otherwise, you will have to copy in the files that
were backed up on initial commissioning again.
90
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618

SIMATIC RF680M Mobile Reader