Table of Contents
Advertisement
9.6.4
Reader settings
With the "Reader settings ..." function you can make the following settings:
● Change the reader's antenna performance
● Set the modulation pattern of the radio profile
● "Initial Q" value setting. This value defines the number of tags expected to be in the
● Select the transmit channel for the European radio profile (ETSI).
Select "Tools > Reader Settings ..." to parameterize these settings.
The "Reader Settings" window opens:
Figure 9-17
9.6.5
Settings
You can make the following settings using this function:
● Setting scan mode
● Specifying the write and read area of a tag
● Setting data formats.
Select "Tools > Settings" to parameterize these settings. The "Settings" window opens:
SIMATIC RF680M Mobile Reader
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
measuring field at the same time. A suitable selection permits a faster detection of tags in
the field by the reader.
The following relation applies:
2
= number of expected tags.
Initial Q
Reader settings
"RF680M" software
9.6 The functions in the "Extras" menu
75
Advertisement
Table of Contents
