Exit; The Functions In The "Tag" Menu; Overview Of Tag Functions - Siemens SIMATIC RF680M Operating Instructions Manual

The software "RF-MANAGER"
8.3 Application mode "Mobile"
8.3.4.4

Exit

You can exit the RF-MANAGER program using "File > Exit" or the <ESC> key. You then
reach the WinCE operating system level of the PSION Workabout Pro. You require the
password relevant to the application for this, if you have previously assigned one.
Note
A connection to RF-MANAGER is established as long as the "RF-MANAGER" software is
running on the SIMATIC RF680M. On exiting, this connection is closed down.
8.3.5

The functions in the "Tag" menu

8.3.5.1

Overview of tag functions

The following tag functions are available that you can select in the menu via "Tag":
● Scan (with "Edit Tag" function activated)
● Read Data (with "Edit Tag" function activated)
● Write ID (with the "Edit Tag" function activated)
● Lock Tag (with the "Edit Tag" function activated)
● Kill Tag (with the "Edit Tag" function activated)
44
You can switch to data acquisition by selecting this function (seeAcquire data and
transfer it to RF-MANAGER (Page 33)).
You can switch to the data editor by selecting this function (seeThe data editor
(Page 34)).
Figure 8-8 RF-Manager tag functions
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
SIMATIC RF680M Mobile Reader