Writing To The Tag - Siemens SIMATIC RF680M Operating Instructions Manual

See also
Settings (Page 75)
9.5.5

Writing to the tag

Write tag data
If you click the "Write" button in the data editor (or press <Ctrl+W>), you can write the data
that is currently displayed in the editor to the tag.
"Write" button
Writing the data area of a tag
In the data editor, you can select the required memory area of the tag in which you want to
write data, and reduce it, if required, by removing the check mark from "Complete" and
entering the address and length in the respective fields.
Writing the complete tag
If all memory areas of the tag are to be completely read or written together, set the check
mark for "Complete".
With this function you can display the complete size of the selected memory area.
If the check mark is set for "Complete", "Read all" and "Write all" are displayed on the
buttons.
Figure 9-8
SIMATIC RF680M Mobile Reader
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
"Write All" button
"RF680M" software
9.5 The functions in the "Tag" menu
65