Settings In The Engineering System; Parameterizing The Wlan Card In The Simatic Rf680M Mobile Reader - Siemens SIMATIC RF680M Operating Instructions Manual

The software "RF-MANAGER"
8.1 Prerequisites for working with the software "RF-MANAGER"
8.1.4

Settings in the Engineering System

1. Enter IP address of the reader
2. Enter the network address of the PC
Note
An automatic reader search is not possible in the Engineering System
The automatic reader search via "Project > Reader configuration > Communication settings"
does not function in the case of mobile readers.
8.1.5

Parameterizing the WLAN card in the SIMATIC RF680M mobile reader

Two examples are given below for the procedure that you can follow for configuring the
WLAN card of SIMATIC RF680M.
Consult your network administrator to ensure that the WLAN connection is set up correctly.
You will find detailed information on configuring the WLAN in the operating instructions for
the PSION WORKABOUT PRO.
30
Enter the assigned IP address in the device settings of the mobile reader ("RFID devices
> RFID device_X").
Enter the network address of the PC in the network settings ("Device settings > RFID /
network settings").
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
SIMATIC RF680M Mobile Reader