Table of Contents
Advertisement
● Effect of the "Data" settings:
Hex
● Effect of the settings under "Address" and "Length"
Display in the
editor
Settings under "Auto-Save Filename"
Under "Auto-Save Filename" you can define whether the same file with the same name is
always updated when scanning tags, or whether new files are saved in each case.
Figure 8-17
SIMATIC RF680M Mobile Reader
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
Hexadecimal, decimal or ASCII number format
"Hex" or "Dec" presentation format can be recognized in the "Address" and "Length" lines
in the data editor.
Dec
When the check mark is missing, you can enter decimal data here. If you subsequently
set the check mark, the data will be converted into hexadecimal format. Depending on the
format setting, the values will be changed in the editor.
You can see from the data editor whether "Hex" or "Dec" is activated; for Hex format, "0x"
is shown for "Address" and "Length":
"Hex" check mark not activated
Auto-Save Filename
The software "RF-MANAGER"
8.3 Application mode "Mobile"
ASCII
"Hex" check mark activated
53
Advertisement
Table of Contents
