Table of Contents
Advertisement
● Save Tag As (with "Edit Tag" function)
● Exit
8.3.4.2
Open
The function is available in the application mode "Mobile" when "Edit Tag" has been
activated in RF-MANAGER.
You can load a file via "File > Open" if the file was saved beforehand with the command "File
> Save" or if it was transferred from the PC to the "Flash Disk" directory of the SIMATIC
RF680M (also see Data transfer between the PC and mobile reader (Page 84)).
All the files of the "Flash Disk" folder are displayed. You can select the desired file via the
touchscreen or by entering the filename under "Name" and <OK>.
8.3.4.3
Save Tag / Save Tag As
The functions are available in the application mode "Mobile" when "Edit Tag" has been
activated in RF-MANAGER.
Via "File > Save", you can save data currently displayed in the editor of the reader to a file on
the SIMATIC RF680M. If you select "Save", the current file will be replaced; if you select
"Save Tag As", you can select a new directory or a new file name.
The filename can be up to 100 (alphanumeric) characters in length. XML format is used
automatically for saving. Also refer to the Chapter "File storage on the RF680M (Page 83)"
as well as "Organization of the .XML files in the Flash Disk directory (Page 86)".
SIMATIC RF680M Mobile Reader
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
Figure 8-7
The file functions
The software "RF-MANAGER"
8.3 Application mode "Mobile"
43
Advertisement
Table of Contents
