Table of Contents
Advertisement
"RF680M" software
9.6 The functions in the "Extras" menu
Figure 9-18
Settings in "Scan mode"
Here, you can choose between single tag and bulk scanning.
● With "Single Tag", the tags are only scanned until a tag ID is detected.
● With "Bulk", the device will constantly try to scan additional tag IDs (until time-out or
Settings under "Format"
You can set different formats (for the editor, data, address and length) under "Format" that
are explained below.
● Effect of the "Editor" settings:
76
Settings window
manual interruption of the command).
This setting is appropriate, for example, if you are searching for a specific tag in a field
that contains several tags.
Byte, binary
Depending on the format that you select, the interface in the data editor is as depicted
below:
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
SIMATIC RF680M Mobile Reader
Advertisement
Table of Contents
