Table of Contents
Advertisement
"RF680M" software
9.6 The functions in the "Extras" menu
If you want to perform a write function now, you must enter the appropriate password. You
only have to enter the password once in the case of several consecutive write commands. It
will remain valid for 5 minutes after the last write function is executed.
This password is also required to exit the application.
Default password
No password is assigned in the delivery condition.
Note
Forgot password?
If you have forgotten your password, the original status of the device can be restored. See
System reset (Page 89)
9.6.3
Reader status
Version statuses and settings of the RF600 read/write device can be read out with the
"Reader Status" function.
● API version
● Model (US or EU)
● Firmware version of the RFID module.
74
Figure 9-16
Reader status
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
SIMATIC RF680M Mobile Reader
Advertisement
Table of Contents
