Table of Contents
Advertisement
9.5.7
Write ID
You can change the ID of a tag using the function "Write ID".
Select "Tag > Write ID" for this purpose. The following window is displayed.
Figure 9-9
Enter ID
Enter the desired ID.
It must be possible to divide number of ID characters by four.
Transferring the ID to the transponder
Click the "OK" button to transfer the ID to the tag.
"Access Password" field
When the tag to be written is protected with an access password, you must enter the
password in the "Access Password" field.
Note
Only keep one tag in the scanning range of the SIMATIC RF680M
Ensure that only one tag is in the scanning range of the SIMATIC RF680M when the tag ID
is being written. Otherwise, the tag will not be written.
9.5.8
Locking data areas
You can lock a tag by means of the "Lock Tag" function.
SIMATIC RF680M Mobile Reader
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
"Write ID" window
"RF680M" software
9.5 The functions in the "Tag" menu
67
Advertisement
Table of Contents
