Table of Contents
Advertisement
9.5.2
Scanning RFID tags and their tag ID
To scan one or more tags and their IDs, click the "Scan" button.
You can also activate the "Scan" function by other means:
● Via the keystroke combination <Ctrl +S>
● Via "Tag > Scan" in the menu, then click the "Scan" button
● Via the white <Scan> buttons mounted on the side of the device. See Chapter Key
The tag IDs (in Hex) appear in the display:
Figure 9-4
Only newly scanned tags or their IDs are added, i.e. IDs are not entered twice in the ID list.
Depending on the setting mode, you can acquire one or more tags at the same time. For
detailed information on scanning mode, see Chapter Settings (Page 75).
The time-out display appears when a tag has not been scanned for 20 seconds.
Archiving scanned tags
To save the list of scanned tags, select "File > Save List As" in the menu.
SIMATIC RF680M Mobile Reader
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
functions (Page 25) Key(s)
Figure 9-3
"Scan" button
Scan tag
③
.
"RF680M" software
9.5 The functions in the "Tag" menu
61
Advertisement
Table of Contents
