Table of Contents
Advertisement
S u b C o m p a c t B o a r d
G E N E - C V 0 5
3.2 AMI BIOS Setup
AMI BIOS ROM has a built-in Setup program that allows users to
modify the basic system configuration. This type of information is
stored in battery-backed CMOS RAM so that it retains the Setup
information when the power is turned off.
Entering Setup
Power on the computer and press <Del> or <F2> immediately. This
will allow you to enter Setup.
Main
Set the date, use tab to switch between date elements.
Advanced
Advanced BIOS Features Setup including TPM, ACPI, etc.
Chipset
Host bridge parameters.
Boot
Enables/disable quiet boot option.
Security
Set setup administrator password.
Save&Exit
Exit system setup after saving the changes.
Note:
1. If the "Control LVDS2 (CH7511)" has been set "Disable," and then, the
screen cannot be switched to LVDS2 under the OS.
Chapter 3 AMI BIOS Setup 3-3
Advertisement
Table of Contents
