Table of Contents
Advertisement
S u b C o m p a c t B o a r d
2.1 Safety Precautions
Chapter 2 Quick Installation Guide
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis
2-2
G E N E - C V 0 5
Advertisement
Table of Contents
