Chapter 2: Overview; Remote Control - Sim2 Sirio User Manual

2Overview

Remote Control

Custom Remotes
You can use your own IR remote control to control your SIRIO projector.
• If you are using a remote control with learning capabilities, use the projector remote
control to teach the commands to your remote.
• If you are using a programmable remote control, the setup software probably allows
importing of Pronto Hex codes. See SIM2 SIRIO IR Control for a list of all the projector
codes in Pronto Hex format, including a number of discrete codes for:
◦ Aspects
◦ Memories
◦ 3D Controls (3D Mode and Input Formats)
2 Overview
Turn backlight on for about 5 seconds
Turns the projector off
Select inputs and turn the projector
1-9
on
Enters OSD Input menu and turns the
0
projector on
●
OK enters submenus, confirms actions
ESC Exits OSD
▴
Select menu items, adjust settings or
◂ ▸
cycle through the test patterns
▾
Enter OSD Main menu and select the
MENU
desired section, each press of the key
+ / -
selects the next tab in the menu
II 3D enters 3D menu
Memory enters Memories menu
Perform user-defined actions (default
F1, F2 assignments are: F1 = Zoom, F2 =
Focus)
Info displays projector Info
A Auto performs Auto Adjustment
Aspect enters Aspect Quick menu
Not used
SIRIO 9
User Guide