Memories - Sim2 Sirio User Manual

●
•Focus Once selected, ◂ and ▸ allow the image to be focused. By pressing
on the
remote control specific internal test pattern is displayed. This is the default function
for key F2.
•Blank Turns off the video signal on-screen. Press Esc to restore video to the screen.
•Gamma correction Activates Gamma Correction quick menu. Use ▴ or ▾ to cycle
through available Gamma tables.
•Freeze Turns on or off picture still mode.
Source Information
When enabled (Yes), the projector displays information about the current input signal
every time a new signal is detected. If disabled (No) no information is displayed.
Help Menu
When enabled, the Help bar (providing tips for menu navigation) is displayed at the
bottom of the main menu.
OSD Background
Selects the background of the OSD (Clear or Solid).
OSD Position
Changes the location for the display of the Main Menu OSD.
To select one of the nine preset positions:
•press 1-9 on the remote control
To create a custom position:
1.select the preset that is closest to the desired position
2.use ◂, ▸, ▴ or ▾ for a finer adjustment
Note: Avoid locations too close to corners or edges to prevent cropping of larger
menus.
OSD Display Timeout
Sets duration OSD is visible after the last event. Adjust in 10 second increments from
10 to 200 seconds.

Memories

You can store and recall at a later time up to six different sets of values (Memories)
per input type, so that you have customized setups for each viewing condition. Each
memory saves the main image settings that are available for a given input type. Refer
to Table 4.5 for details.
4 Operation SIRIO 34
User Guide