Sony MSW-970 Operation Manual page 160

No. Page
F05 REFERENCE REFERENCE STORE
F06 LENS FILE 1
F07 LENS FILE 2
F08 LENS FILE 3
F09 MEMORY
STICK
160
Specifications
Item Settings
—
REFERENCE CLEAR —
REFERENCE LOAD —
REFERENCE SAVE —
F. ID 16 characters
SCENE WHITE DATA OFF/ON
LENS FILE RECALL —
LENS FILE STORE —
F. ID 16 characters
LENS NO OFFSET —
SOURCE MEMORY —
IRIS GAIN (–99 to +99)
LENS AUTO RECALL OFF/ON
L. ID (Display only)
L. MF (Display only)
LENS M VMOD (–99 to +99)
LENS CENTER H –48 to +47
LENS CENTER V –15 to +14
TEST OUT SELECT ENC/R/G/B
LENS R FLARE (–99 to +99)
LENS G FLARE (–99 to +99)
LENS B FLARE (–99 to +99)
LENS W-R OFST (–99 to +99)
LENS W-B OFST (–99 to +99)
SHADING CH SEL R/G/B/TEST
TEST OUT SELECT ENC/R/G/B
LENS R/G/B H SAW (–99 to +99)
LENS R/G/B H PARA (–99 to +99)
LENS R/G/B V SAW (–99 to +99)
LENS R/G/B V PARA (–99 to +99)
M.S. FORMAT —
M.S. IN > JUMP TO OFF/USER/
ALL/SCENE/
LENS/REFER/
USER1
Default Description
EXEC Saves the reference file in internal memory.
EXEC Clears the reference file.
EXEC Loads the reference file.
EXEC Saves the reference file to "Memory Stick."
— To name the reference file.
OFF See "White balance setting data to be saved in
the scene file" on page 110.
EXEC Loads lens files.
EXEC Saves lens files.
— To name lens files.
EXEC To clear lens files.
MEMORY1 Number of selected lens file
0 Iris gain value of lens file
ON Turns the automatic recall function for serial
lens.
— To show the lens-specific ID (when a serial
lens is connected).
— To show the name of the lens manufacturer
(when a serial lens is connected).
0 For the lens file V Saw shading
0 For the horizontal position compensation of
lens file center marker
0 For the vertical position compensation of lens
file center marker
ENC Selects signal output to TEST OUT connector.
0 Adjusts the lens file flare (R).
0 Adjusts the lens file flare (G).
0 Adjusts the lens file flare (B).
0 Adjusts the R compensation value for white.
0 Adjusts the B compensation value for white.
R Selects the channel adjusted by this menu. If
TEST is selected, the setting is the same as
the setting of TEST OUT SELECT.
ENC Selects the signal output to the TEST OUT
connector.
0 For the H Saw white shading compensation
0 For the H Parabola white shading
compensation
0 For the V Saw white shading compensation
0 For the V Parabola white shading
compensation
EXEC Formats a "Memory Stick."
OFF See "6-3 Jumping to a File-Related Menu Page
When Inserting a "Memory Stick"" on page
113.