Maintenance Menu - Sony MSW-970 Operation Manual

MAINTENANCE Menu

The following table lists and describes the items in the
MAINTENANCE menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
No. Page Item
M01 WHT SHADING WHT SHAD CH
SEL
TEST OUT SELECT ENC/R/G/B
R/G/B WHT H SAW (–99 to +99)
R/G/B WHT H PARA (–99 to +99)
R/G/B WHT V SAW
R/G/B WHT V PARA (–99 to +99)
WHITE SAW/PARA
M02 BLK SHADING BLK SHAD CH SEL R/G/B/TEST
TEST OUT SELECT ENC/R/G/B
R/G/B BLK H SAW
R/G/B BLK H PARA (–99 to +99)
R/G/B BLK V SAW
R/G/B BLK V PARA
BLACK SAW/PARA
MASTER BLACK
MASTER
GAIN(TMP)
M03 LEVEL ADJ ENC VIDEO LEVEL (–99 to +99)
RGB LEVEL
TEST OUT SELECT ENC/R/G/B
H BLANKING
WIDTH
Settings Default
R/G/B/TEST R
ENC
0
0
(–99 to +99) 0
0
OFF/ON ON
R
ENC
(–99 to +99) 0
0
(–99 to +99) 0
(–99 to +99) 0
OFF/ON ON
(–99 to +99) 0
–3/0/3/6/9/12/18/ 0 dB
24/30/36/42/48 dB
0
(–99 to +99) 0
ENC
(–99 to +99) 0
Description
Selects the channel adjusted by this menu. If
TEST is selected, the setting is the same as
the setting of TEST OUT SELECT.
Selects the signal output to the TEST OUT
connector.
Adjusts the H Saw white shading
compensation.
Adjusts the H Parabola white shading
compensation.
Adjusts the V Saw white shading
compensation.
Adjusts the V Parabola white shading
compensation.
Turns white shading Saw and Parabola
compensation on and off.
Selects the channel adjusted by this menu. If
TEST is selected, the setting is the same as
the setting of TEST OUT SELECT.
Selects the signal output to the TEST OUT
connector.
For the H Saw black shading compensation
For the H Parabola black shading
compensation
For the V Saw black shading compensation
For the V Parabola black shading
compensation
Turns black shading Saw and Parabola
compensation on and off.
Adjusts the master black level.
Temporarily adjusts the master gain value.
Adjusts the encoder video level.
Adjusts the R/G/B video level.
Selects the signal output to the TEST OUT
connector.
Adjusts the H blanking width.
151
Specifications