Loading Saved Data From A "Memory Stick - Sony MSW-970 Operation Manual

1
On the USER FILE page, turn the MENU knob to
b
move the mark to "F. ID."
F01 USER FILE
USER FILE LOAD
USER FILE SAVE
F.ID : sssssssssssssssss
USER PRESET
2
Press the MENU knob.
A character table appears, allowing you to select
characters you want to enter.
F01 USER FILE
USER FILE LOAD
USER FILE SAVE
F.ID :?x
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[Y]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET
3
Follow the procedure of steps 4 and 5 described in "5-
2-7 Setting the Shot ID" (page 88) to enter the file ID.
4
When you finish entering the file ID, turn the MENU
knob to move the x mark to "END," then press the
MENU knob.
The entered file ID is now displayed.
F01 USER FILE
USER FILE LOAD
USER FILE SAVE
F.ID : sssssssssssssssss
USER PRESET
After setting the file ID, carry out the procedure from
step 3 in "6-1-2 Saving USER Menu Data (User File)
to the "Memory Stick"" (page 106).
The set file ID is saved in the "Memory Stick" with the
data.
Selecting the display contents
You can select the contents of the file to be displayed on
the USER SAVE page and USER LOAD page.
Proceed as follows:
1
Turn the MENU knob to move the
"DISPLAY MODE," and press the MENU knob.
108
Saving and Loading User Files
TOP
: EXEC
: EXEC
: EXEC
TOP
: EXEC
: EXEC
ESC END
TOP
: EXEC
: EXEC
: EXEC
File ID set in step 3
b
mark to
2
Turn the MENU knob to move the
desired type of the display contents (see the following
table) appears, then press the MENU knob.
P00 USER LOAD
DISPLAY MODE
001.USER1
002.USER2
003.NO FILE
004.USER4
005.USER5
Display type Description
ALL File ID (10 characters) and date ((month/
day/year) for the MSW-970 and (day/
month/year) for the MSW-970P))
F.ID File ID (16 characters)
DATE Saved date (year/month/day/hours/
minutes/seconds)
MODEL Information on the model
6-1-3 Loading Saved Data from a
"Memory Stick"
Note
The data loaded from the "Memory Stick" overwrites the
data saved in the camcorder.
Proceed as follows:
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2
Turn the MENU knob until the USER FILE page
appears, then press the MENU knob. Alternatively,
select "USER FILE" on the CONTENTS page.
3
Turn the MENU knob to move the
FILE LOAD," and press the MENU knob.
The P00 USER LOAD page appears.
?P00 USER LOAD
DISPLAY MODE
001.USER1
002.USER2
003.NO FILE
004.USER4
005.USER5
4
Turn the MENU knob until the page which contains
the desired file number appears, then press the MENU
knob.
b
mark until the
ESC
: F.ID
b
mark to "USER
ESC
: ALL
JAN/01/04
JAN/15/04
FEB/05/04
FEB/20/04