Sony MSW-970 Operation Manual page 154

No. Page
M08 TIMECODE
M09 VTR MODE
154
Specifications
Item Settings
TC OUT AUTO/GENE
DF/NDF DF/NDF
(MSW-970 only)
EXT-LK UBIT INT/EXT
LTC UBIT FIX/TIME
VITC UBIT FIX/TIME
WATCH AUTO ADJ OFF/ON
UBIT GROUP ID 000/101
VITC INS LINE 1 12 to 19 H
(MSW-970)
9 to 22 H
(MSW-970P)
VITC INS LINE 2 12 to 19 H
(MSW-970)
9 to 22 H
(MSW-970P)
REC TALLY BLINK OFF/ON
REC START BEEP OFF/ON
LCD DISPLAY TIMER/OFF/CONT TIMER
HOLD
LCD HOLD TIMER 1H/3H/8H
REC VIDEO RATE 50M/40M/30M
STBY OFF TIMER OFF/5MIN/10MIN/
30MIN/60MIN
STOP KEY FREEZE OFF/FRAME/
FIELD
Default Description
AUTO Selects the time code signal output.
AUTO: Outputs the time code generator
output during recording and outputs the
time code reader output during playback.
GENE: Outputs the time code generator
output during recording and playback.
DF Sets DF or NDF mode.
DF: Drop frame mode
NDF: Non-drop frame mode
INT Sets whether the LTC UBIT setup value locks
to an INT or an EXT source when the time
code is locked to an external source.
INT: Internal lock
EXT: External lock
FIX Sets the data to be recorded in UBIT of LTC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
FIX Sets the data to be recorded in UBIT of VITC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
ON Turns the automatic time correction function
of the built-in clock on/off . With ON, the time
of the built-in clock matches with the time
data of the user bits of an external time code.
000 Selects the UBIT GROUP ID.
16H Selects the line into which VITC is to be
inserted.
19H
18H Selects the line into which VITC is to be
inserted.
21H
ON Turns the tally illumination control on/off in the
event of BATTERY BEFORE END/DISC
BEFORE END.
OFF Turns on/off the alarm sound at REC START/
STOP.
Sets the time code (TC) display after power-
off as follows.
TIMER: The TC display turns off after the
elapse of the time set by the LCD HOLD
TIMER below.
OFF: Not displayed.
CONT: Displayed.
1H Sets the duration of time after which the TC
display is to be turned off after power-off,
when LCD DISPLAY HOLD is set to TIMER
(H: hours).
50M Sets the recording bit rate.
60MIN Sets the length of time for the stand-by off
timer.
OFF Selects the freeze function.