Yeastar Ta Series Installation; Placement Instructions; Installation Instructions; Wall-Mount Instruction - Yeastar Technology TA Series Installation Manual

3. Yeastar TA Series Installation

To avoid unexpected accident, personal injury or device damage, please read the
following instructions before installing the Gateway.

3.1 Placement Instructions


Ambient Temperature: to avoid overheating, please do not run Yeastar TA in the
place where the ambient temperature is above 104° F (40° C).

Ventilation: please make sure that the device has good ventilation around.

Anti-jamming: there may be some sources of interference that might affect the
normal running of the Gateway. It's highly recommended that the device

Should be placed away from high-power radio, radar transmitters and high
frequency, and high-current devices.

Is using independent power junction box and effective anti-grid interference
measures have been taken.

Mechanical load: Please make sure that the device is placed steadily to avoid any
accident that might cause damage. If placed on the desktop, please ensure it is
horizontally placed.

3.2 Installation Instructions

Place the Gateway in a suitable place, and then connect the power adapter and all
other cables to complete the installation.

3.2.1 Wall-mount Instruction

Yeastar TA400/410/800/810, besides being a desktop device, is also wall-mountable.
Mounting the device on the wall could save some space if space is limited.
TA Series Installation Guide
Remove the screws on the
stand. The screw the clump
weight to the stand again to
the stand as the picture
shows.
10/17