Ta Series Basic Configurations; Getting An Ip Address - Yeastar Technology TA Series Installation Manual

4. TA Series Basic Configurations

4.1 Getting an IP Address

Yeastar TA provides web-based configuration interface for administrator and account
user. The user can manage the device by logging in the Web interface.

Access path: http://[IP address]

User Name: admin

Password: password

Default SIP UDP port: 5060
The TA attempts to contact a DHCP server in your network to obtain valid network
settings (e.g., the IP address, subnet mask, default gateway address and DNS
address) by default.
Please enable DHCP Server in your network to obtain the IP address.
Due to the difference of telephony interface, TA FXS Gateway and FXO Gateway will
use different methods to check the IP address.
TA FXS Gateway
1. Use an analog phone connected to the FXS port of the Gateway, press *** to get
into the IVR menu. Enter 1 to obtain the Gateway's IP address.
2. If there is no DHCP server in the network, press 3 for advanced setting, and press
2 to assign a static IP address to the device.
TA FXO/FXS Gateway
1. Download a DeviceFound tool from Yeastar website:
2. Run the DeviceFound.exe software.
3. Find the IP address by the device's MAC address or the SN.
TA Series Installation Guide
FindTA.rar
14/17