Specifications And Operating Environment - Yeastar Technology TA Series Installation Manual

LED Indication
POWER Power status
RUN status
FXS Ports
1-32
Status
FXO Ports
1-8
Status
Ports
Ethernet Port
Reset Button
Power Inlet
RJ11 FXS Ports
RJ11 FXO Ports
RJ21 FXS Ports
RS232 Console Port
(TA1600/1610/2400/
3200)

2.3 Specifications and Operating Environment

Table 2-4 TA400/410/800/810 Specifications and Operating Environment
TA400/410/800/810
Size (L×W×H)
Power Supply
Operating Temperature
Storage Temperature
Humidity
Table 2-2 LED Indications
Status
On The power is switched on.
Off The power is switched off.
Blinking is running properly.
Not
goes wrong.
Blinking/Off
Solid green: the port is idle.
Green light Green light blinking: there is an ongoing
call on the port.
Table 2-3 Ports Descriptions
provides 1 10/100 adaptive RJ45 Ethernet ports, marked as
LAN.
-LAN port: LAN port is for the connection to Local Area
Network (LAN).
Press the reset button to restore the factory defaults.
Please make sure that you want to reset, because once
reset the previous
automatically.
For connection of power supply.
For connection of analog phones/fax machines.
For connection of PSTN interfaces or PBX extension
interfaces.
For connection of analog phones/fax machines with an RJ21
to RJ11 cable.
For debugging.
200 mm × 137 mm × 25 mm
12V 1A
0 to 40° C, 32 to 104° F
to
-20 65° C, 4
10%~90% Non-condensing)
(
TA Series Installation Guide
Description
Description
configurations would
Description
to
149° F
be erased
8/17