Neogate Ta Series Installation; Placement Instructions; Installation Instructions; Wall-Mount Instruction - Yeastar Technology NeoGate TA400 Installation Manual

3. NeoGate TA Series Installation

To avoid unexpected accident, personal injury or device damage, please read the following
instructions before installing the Gateway.

3.1 Placement Instructions

 Ambient Temperature: to avoid overheating, please do not run NeoGate TA in the place
where the ambient temperature is above 104°F (40°C).
 Ventilation: please make sure that the device has good ventilation around.
 Anti-jamming: there may be some sources of interference that might affect the normal
running of the Gateway. It's highly recommended that the device
Should be placed away from high-power radio, radar transmitters and high frequency,

and high-current devices.
Is using independent power junction box and effective anti-grid interference measures

have been taken.
 Mechanical load: Please make sure that the device is placed steadily to avoid any accident
that might cause damage. If placed on the desktop, please ensure it is horizontally placed.

3.2 Installation Instructions

Place the Gateway in a suitable place, and then connect the power adapter and all other cables
to complete the installation.

3.2.1 Wall-mount Instruction

NeoGate TA 400/410/800/810, besides being a desktop device, is also wall-mountable. Mounting
the device on the wall could save some space if space is limited.
NeoGate TA Series Installation Guide
Remove the screws on the
stand. The screw the clump
weight to the stand again to the
stand as the picture shows.
12/20