System Board - HP Pro Tablet 608 G1 Maintenance And Service Manual

System board

Description
Equipped with Intel Atom x5-Z8500 Quad Core 2 GB RAM memory, 32 GB eMMC, NFC, Windows 8.1 EMB
IP (WLAN soldered on), includes audio board and thermal pads
Equipped with Intel Atom x5-Z8500 Quad Core 2 GB RAM memory, 64 GB eMMC, NFC, Windows 8.1 EMB
IP (WLAN soldered on), includes audio board and thermal pads
Equipped with Intel Atom x5-Z8500 Quad Core 4 GB RAM memory, 64 GB eMMC, NFC, Windows 8.1 EMB
IP, WWAN support (WLAN soldered on), includes audio board and thermal pads
Equipped with Intel Atom x5-Z8500 Quad Core 4 GB RAM memory, 64 GB eMMC NFC, Windows 8.1 (WLAN
soldered on), includes audio board and thermal pads
Equipped with Intel Atom x5-Z8500 Quad Core 4 GB RAM memory, 128 GB eMMC, NFC, Windows 8.1 EMB
IP, WWAN support (WLAN soldered on), includes audio board and thermal pads
IMPORTANT:
system board. If any of these components fail and require replacement, the entire system board must be
replaced. The tablet provides units with 32G, 64GB, and 128GB eMMC modules soldered onto the system
board. In addition, the system board contains the Windows DPK. If you are replacing the system board, be
sure to order the board that contains the correct storage capacity and Windows OS version.
IMPORTANT:
operating system. If your tablet is configured as described, do not change the processor configuration
setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your tablet will not restart. You
will have to perform a factory reset to restore the original settings.
IMPORTANT:
must also be reinstalled.
IMPORTANT:
the system board is replaced and is provided in the system board spare kit. When the audio board and system
board are replaced together, reflashing of the TXE region in SPI ROM is not necessary.
IMPORTANT:
may include:
●
Verifying functionality of the tablet
●
Updating the BIOS
●
Updating DMI and other settings
●
Injecting Windows Digital Product Keys
Before removing the system board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the MicroSD card tray (see
5. Remove the Nano SIM card tray (select products only) (see
on page
28 Chapter 5 Removal and replacement procedures
The processor, memory, WLAN+Bluetooth, and eMMC storage card are all embedded on the
Select tablet models are configured with an Intel® Atom
The system boards are not localized; if the system board is replaced, the operating system
The audio board is paired with the system board. The audio board must be replaced every time
After system board replacement, be sure to complete postinstallation tasks as required that
16.
MicroSD card tray on page
Nano SIM card tray (select models only)
Spare part number
823051-401
823052-401
823053-401
826801-401
823054-401
TM series processor and a Windows®
15).