Table of Contents
Advertisement
Table 5-9
WLAN antennas description and part number
Description
WLAN antennas
Antenna adhesive
1.
Prepare the computer for disassembly (see
2.
Remove the display assembly (see
3.
Disconnect the battery cable from the system board (see
Remove the WLAN antennas and cables:
1.
Disconnect the antenna cables from the system board (1).
2.
Peel the antennas off the heat sink and battery (2).
3.
Remove the antennas and cables from the computer (3).
To replace the WLAN antennas, reverse the removal procedures. Run the camera function test after the repair.
For more information, see
System board
To remove the system board, use these procedures and illustrations.
Table 5-10
System board descriptions and part numbers
Description
System board with 8 GB of system memory (includes processor)
System board with 4 GB of system memory (includes processor)
SD card holder
System board support kit
Preparation for disassembly on page
Display assembly on page
Basic camera function test on page
29).
30).
Battery on page
44).
30.
Component replacement procedures
Spare part number
M93511-001
M98505-001
Spare part number
M93505-601
M93504-601
M93503-001
M98016-888
39
Advertisement
Table of Contents
