Table of Contents
Advertisement
3.
Release the bottom speaker (3) from the molding built into the display panel assembly.
4.
Remove the bottom speaker and vibrator module.
Reverse this procedure to install the bottom speaker and vibrator module.
System board
Description
System board equipped with a Qualcomm MSM8926 1.20-GHz quad core processor (SoC),
graphics subsystem with UMA memory, 1.0-GB LPDDR3 system memory, and 16-GB
eMMC hard drive (includes top speaker)
Before removing the system board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Remove the battery (see
6.
Remove the middle frame (see
Remove the system board:
Back cover on page
Battery on page
14).
Middle frame on page
13).
16).
Spare part number
788638-001
System board
21
Advertisement
Table of Contents
