Outer Ring - HP Pro Tablet 608 G1 Maintenance And Service Manual

3. Lift and remove the battery and middle plate (2).
Reverse this procedure to install the battery and middle plate.

Outer ring

Description
Outer ring for models with WWAN capability
Outer ring for models without WWAN capability
1. Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect all external devices from the tablet.
3. Remove the MicroSD card tray (see
4. Remove the Nano SIM card tray (select products only) (see
on page
5. Remove the back cover (see
6. Disconnect the battery (see
7. Remove the WWAN module (see
8. Remove the left speaker (see
9. Remove the audio board (see
16.
Back cover on page
Disconnecting the battery on page
WWAN module (select models only) on page
Left speaker on page
Audio board on page
MicroSD card tray on page
Nano SIM card tray (select models only)
16).
21).
22).
Spare part number
823038-001
823037-001
15).
17).
19).
Outer ring 37