System Board - HP ENVY 8 Note 5000 Maintenance And Service Manual

System board

Description
System board equipped with Intel Atom x5-Z8300 Quad Core 2 GB RAM memory, 32 GB eMMC, LTE,
Bluetooth, (WLAN soldered on)
System board equipped with Intel Atom x5-Z8300 Quad Core 2 GB RAM memory, 32 GB eMMC, Verizon
LTE, Bluetooth, (WLAN soldered on)
IMPORTANT:
might include:
● Verifying functionality of the tablet
● Updating the BIOS
● Updating DMI and other settings
● Injecting Windows Digital Product Keys
Before removing the system board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the following components:
a. Micro SIM/microSD card tray (see
b. White back cover (see
c. Black back cover (see
d. Middle frame (see
5. Disconnect the battery (see
6. Remove the following components:
a. WWAN module (see
b. LCM display cable (see
c. Front-facing camera (see
d. Rear-facing camera (see
7. Disconnect the following antennas and cables from the system board:
a. WLAN antenna (see
b. WWAN antenna and speaker cable (see
c. Micro USB board cable (see
d. Microphone cables (see
e. Side key button cable (see
42 Chapter 5 Removal and replacement procedures
After system board replacement, be sure to complete postinstallation tasks as required that
White back cover on page
Black back cover on page
Middle frame on page
Battery on page
WWAN module on page
LCM display cable on page
Front-facing camera on page
Rear-facing camera on page
WLAN antennas on page
Micro USB board cable on page
Microphones on page
Side key button cable on page
Micro SIM/microSD card tray on page
15).
16).
19).
22).
32).
30).
25).
27).
36).
WWAN antennas on page
28).
24).
Spare part number
834274-601
837404-601
14).
34).
38).