System Board - HP Elite x2 G8 Maintenance And Service Manual

2. Rotate the bracket upward (2), disconnect the cable from the ZIF connector on the fingerprint reader, and
then remove the board from the computer (3).
Reverse this procedure to install the fingerprint reader board.

System board

To remove the system board, use these procedures and illustrations.
Table 6-13 System board descriptions and part numbers
Description
System board (includes processor):
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating system
xxxxxx-601: Windows 10 operating system
Intel Core i3-1115 G4 processor and 8 GB of system memory, with thermal
Intel Core i3-1125 G4 processor and 8 GB of system memory, with thermal
Intel Core i5-1135 G7 processor and 16 GB of system memory, with thermal
Intel Core i5-1135 G7 processor and 8 GB of system memory, with thermal
Intel Core i5-1135 G7 processor and 16 GB of system memory, OSR with thermal
Intel Core i5-1145 G7 processor and 16 GB of system memory, OSR with thermal
Intel Core i5-1145 G7 processor and 8 GB of system memory, OSR with thermal
Intel Core i5-1145 G7 processor and 8 GB of system memory, with thermal
Intel Core i7-1165 G7 processor and 16 GB of system memory, with thermal
Intel Core i7-1185 G7 processor and 16 GB of system memory, with thermal
Intel Core i7-1185 G7 processor and 16 GB of system memory, OSR with thermal
IMPORTANT:
possible.
Before removing the system board, follow these steps:
Use extreme care when peeling up the WLAN antennas. Keep them as flat (not wrinkled) as
Spare part
number
M51650-001
M75287-001
M51651-001
M51652-001
M51657-001
M51653-001
M51654-001
M51658-001
M51655-001
M75288-001
M51656-001
System board 63