System Board - HP Pro x2 612 G2 Maintenance And Service Manual

System board

Description
System board
UMA graphics Core M-7Y30 4 GB with Windows operating system and WLAN capability
UMA graphics Core i5-7Y54 4 GB with Windows operating system and WLAN capability
UMA graphics Core i5-7Y54 8 GB with Windows operating system and WLAN capability
UMA graphics Core i5-7Y57 4 GB with Windows operating system and WLAN capability
UMA graphics Core i5-7Y57 8 GB with Windows operating system and WLAN capability
UMA graphics Core i7-7Y75 8 GB with Windows operating system and WLAN capability
UMA graphics Pentium 4410Y 4 GB with Windows operating system and WLAN capability
USB Type-C bracket (included with the Plastics Kit)
POGO connector (includes cable)
Microphone board
Front webcam
IMPORTANT:
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Keyboard (select products only) (see
b. Micro SIM card tray (see
c. MicroSD card tray (see
d. Rear cover (see
e. Disconnect the battery (see
f. Kickstand (see
g. SSD (see
h. Display panel (see
i. Battery (see
Remove the system board:
1. Remove the 2 Phillips M1.6x2.0 screws (1) securing the POGO cable.
2. Use a thin tool (2) to release the POGO cable from the glue securing it.
Make special note of each screw size and location during removal and replacement.
Micro SIM card tray on page
MicroSD memory card tray on page
Rear cover on page
Disconnecting the battery on page
Kickstand on page
SSD on page 38)
Display panel on page
Battery on page
Keyboard (select products only) on page
32)
34)
36)
45)
49)
Spare part number
918345-601
918346-601
918347-601
918348-601
918349-601
918350-601
918351-601
918392-001
918389-001
918387-001
918906-001
31)
33)
35)
Component replacement procedures 55