Front-Facing Webcamera - HP Pro Tablet 608 G1 Maintenance And Service Manual

Front-facing webcamera

Description
Front-facing webcamera (includes cable)
Before removing the front-facing webcamera, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Disconnect the battery (see
6. Remove the left speaker (see
7. Disconnect the proximity sensor antenna ribbon cable from the audio board (see
on page
Remove the front-facing webcamera:
CAUTION: Use care to prevent damaging the ZIF connectors and ribbon cables.
1. Release the copper grounding strap and remove the plastic tape (1) covering the front-facing
webcamera ZIF connector.
2. Release the ZIF connector (2) attaching the front-facing webcamera cable to the system board.
3. Peel up the adhesive connecting the webcamera cable to the battery. Start from the elbow of the
adhesive and lift the front-facing webcamera cable (3) from the display panel assembly.
IMPORTANT:
carefully to avoid breaking the clips.
Back cover on page
Disconnecting the battery on page
Left speaker on page
22).
The webcamera is held in place by two plastic retaining clips. Detach the camera
16).
17).
21).
Spare part number
823055-001
Audio board
Front-facing webcamera 25