Disconnecting The Battery - HP Pro Tablet 608 G1 Maintenance And Service Manual

3. Lift the tool handle (2) and the use the handle (3) to remove the back cover.
Reverse this procedure to install the back cover.

Disconnecting the battery

CAUTION: Disconnecting a battery that is the sole power source for the tablet can cause loss of information.
To prevent loss of information, save your work or shut down the tablet through the operating system before
disconnecting the battery.
Before disconnecting the battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off, turn the computer on, and then
shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
NOTE:
Disconnect the battery:
Back cover on page
Disconnect the battery cable carefully; pulling too hard can break the system board connector.
16).
Disconnecting the battery 17