Valve Mechanism And Cylinder Head Removal, Check And Installation - Joyner JNSZ1600QL Owner's Manual

Fig.42 Fig.43
Removal — —Remove camshaft gear. ——Note the direction of oil seal installation, pry out oil seal
：
from the oil seal hole in cylinder head be sure not damage the oil seal hole. Installation ——Clean the
， ：
oil seal hole in cylinder head ,apply clean engine oil on oil seal edge and camshaft oil seal journal
，
install oil seal on oil seal journal carefully p ush oil seal in perpendicularly into place with a
，
appropriate cushion block and used camshaft gear bolt. An appropriate socket wrench may be used to
push oil seal into place.
8

. Valve mechanism and cylinder head removal, check and installation

【 】
49