Joyner JNSZ1600QL Owner's Manual page 16

OPERATION
d. Start engine
1. Press the clutch pedal down, put the shift lever in neutral
2 I nsert the key into the ignition-switch
、
If the engine is cold;
1. Press down the clutch pedal
2. Turn the key clockwise to the "on" position. Release the key and the clutch pedal when the
engine starts.
If the engine is warm;
Press the throttle slightly and turn the key clockwise to the "on" position, release the key and the
throttle when the engine starts.
Each time prior to starting the engine, check the throttle assembly to ensure that when
pedal is pushed all the way forward the assembly is working smoothly and returns to idle
when released. Do not operate if pedal or engine throttle linkage fail to return to idle. If
unable to correct the problem through lubrication, adjustment or replacement of worn parts,
contact your dealer for assistance.
Fig. 2
Fig. 3
15