Joyner JNSZ1600QL Owner's Manual page 22

Table of Contents

Advertisement

SERVICE INSTRUCTIONS
Fig. 11
w
N
L o
M I
n
g i
e n
i n
l
v e
l e
l
o i
g h
X
H i
M A
Fig. 12
a. With the engine warm, put the vehicle on the level ground.
b. Shut down the engine, put a collecting oil plate under the engine oil outlet. Loosen the oil outlet
plug in the warm engine. Let the engine oil out fully (see Fig. 9).
c. Tighten the engine oil outlet plug.
d.
Remove the oil filler cap (see Fig. 10), fill oil (SAE 10W/30-50 ) about 3.86 liters to the engine.
e. Pull out the engine oil dip stick (see Fig. 11), confirm the corrective oil level in the crankcase (see
Fig. 12).
Check engine oil and recharge
a. If the color of engine oil changes, you need to replace the engine oil. Replace the engine oil as
above.
b. Check the engine oil level, change if necessary from d as above.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents