Joyner JNSZ1600QL Owner's Manual page 131

1. Primary signal for ignition coil
2.B phrase idling actuator signal
3.D phrase idling actuator signal
4.Protect relay signal
5.Without connection line
6.Warning light energizing signal
7.Without connection line
8.A/C input signal (see note)
9.Without connection line
10.Diagnosis socket L connection
line
11.Tacho sensor negative input
12. λ s ensor negative input
13.Water temperature sensor
negative
input
14. Pressure sensor/throttle valve
potentiometer 5A power supply
15. Diagnosis socket K connection
line
30.Throttle valve potentiometer signal input
31.Intake air temperature sensor signal input
32.Absolute pressure sensor signal input
33.Without connection line
34.Main ground wire of engine
35.Ignition switch +12V power supply input
A/C I/O may only be supplied to the vehicle equipped with A/C and the ECU of the corresponding
engine, i.e. the vehicle of single-point injection with A/T.
ECU I/0 function
16.water temperature/air/pressure sensor
and ground wire of throttle valve
position sensor
17. Main ground wire of engine
18.Fuel injector signal
19. Primary signal for ignition coil 2
20.A phrase idling speed actuator signal
21.C phrase idling speed actuator signal
22.Fuel vapor solenoid signal
23.Fuel pump relay/ speed counter signal
24.A/C relay signal (see note)
25.Without connection line
26.Ignition switch input (15/24)
27.Without connection line
28.Speed sensor positive input
29. λ s ensor positive input
130