Joyner JNSZ1600QL Owner's Manual page 154

Fig.220
Maintenance of Shift Shaft Bearing
When the shift shaft bearing is changed, the shift shaft assembly has to be taken out. And then the oil seal
is removed.
Dismantlement:
To use the special tool is inserted into the transmission case. As the figure shown, the bearing is tapped, till
the bearing is stretched out.
Fig.221
Installation:
Fig.222
As the figure shown, the special tool is used to insert into the transmission case, the shift shaft bearing is
pressed in position. And then the shift shaft oil seal is pressed in. The shift shaft assembly is installed.
153