Inserting And Removing A Memory Card - NEC Generation N3000 M760s User Manual

7 in 1 Flash Memory Card Reader
Discovering Your Computer Your computer provides a seven-in-one card reader that can accept the following three types of memory
card.
•
Memory Stick™, Memory Stick PRO and Memory Stick Duo card
•
MultiMedia (MMC) and Reduced Size MultiMedia (RS-MMC) card
•
Secure Digital (SD) and Mini-SD card
All of these memory cards are used in a wide selection of digital cameras, PDAs, MP3 players and mobile
phones. The cards can be used as 'bridge media', transferring files (music, images, presentations, data,
etc...) between your computer and other devices.

Inserting and Removing a Memory Card

1.
Align the card so that the connector points towards the port, with the connectors facing down.
2.
Carefully slide the card into the port. If you find you need to use any force to insert the card, try
reorientating the card slightly.
Note:
The last 3 to 8 mm of the card will extend from beyond the slot, depending on the card
used.
3.
If the card contains some files, the Windows Auto Play window may appear (this depends on the
contents of the card) and ask you if you wish to use a program to access the contents of the card. Select
an option here if it is appropriate, otherwise select Cancel. If the card contains no files, or unknown
files, a window will open showing the contents of the card.
Note:
If you wish to access the contents of the memory card later; you can do it via 2 icons called
Removable Disk located in the My Computer window in Windows XP, and in the Computer
window in Windows Vista.
4.
When you have finished with the card, you can remove it by carefully pulling it out of the port.
© 2007-2009, NEC Computers S.A.S. All rights reserved.
Discovering Your Computer
Figure 16: Inserting a memory card
58