Recording Video And Audio; Capturing An Image - NEC Generation N3000 M760s User Manual

Integrated Camera (optional)
Discovering Your Computer Located on the top of the LCD panel and associated with the BisonCap utility software, the integrated
camera allows you to create video or to capture pictures. The camera can also be used for video
conferencing.
Note:
You may be prompted to turn on the camera by pressing Fn-F10 if the camera has been
disabled.
Recording Video
1.
Click the BisonCap icon
The BisonCap software utility opens.
2.
In the File menu, click Set Capture File, and type a name for your video in File name. Close the
window.
3. To modify the quality of the image, in the Options menu, click Video Capture Filter.
4. To modify the size of the image, in the Options menu, click Video Capture Pin.
5. To start recording, in the Capture menu, click Start Capture., and click OK when prompted.
6. Stop registering by selecting Stop Capture in the Capture menu.
Note:
You can define a time limit by selecting Capture, Record Time Limit (before starting the
capture). Check Enable Record Time Limit and define the time in seconds.

Recording Video and Audio

Perform the same process as in
Record Audio. (a check mark appears in front of the option when it is selected.)

Capturing an Image

1.
Click on the BisonCap icon
The BisonCap software utility opens.
2. To modify the quality of the image, in the Options menu, click Video Capture Filter.
3. In the Options menu, click Take Picture.
Your image is saved on the desktop in a Snapshot file.
© 2007-2009, NEC Computers S.A.S. All rights reserved.
Discovering Your Computer
on the Desktop.
but before starting the capture, select Capture, then
"Recording Video"
on the Desktop.
50