Removing The Memory Module - NEC VERSA P600 Disassembly Manual

Note: When assembling the heat plate, make sure that these three hocks on the heat plate are properly
inserted into the openings located on the top cover.

Removing the Memory Module

To remove the memory module, first remove the Keyboard cover (see
cover), remove the keyboard (see
heat plate) then perform the following steps:
1. Unclip memory module as shown in Fig. 13
2. Remove the Memory Module from its slot and put it aside.
Fig. 12 Removing Heat plate from base unit
Removing the
Fig. 13 Removing the memory module
NEC Versa P600 Disassembly Manual
Removing the keyboard
keyboard), remove heat plate (see Removing
Page 10