Removing The Memory Module - NEC Versa M320 Disassembly Manual

Note: Use extra care when disconnecting the HDD connector
6. Unscrew the four screws on both sides of the hard disk drive as shown in Fig. 4

Removing the Memory Module

To remove the Memory Module, first remove the battery (see
perform the following steps:
1. Release the one screw retaining the memory module slot cover.
Fig. 5 Removing the screw retaining the memory module slot cover
Fig. 3 Disconnecting the hard disk drive
Fig. 4 Unscrewing the hard disk drive bracket screws
NEC Versa M320 Disassembly Manual
Removing the Battery), then
M3x4 Black
M2.4x4.5 Silver
Page 6