Removing The Memory Module - NEC Versa M540/PB EasYnote R7 Disassembly Manual

Removing the Memory Module

To remove the Memory Module, first remove the Battery (see
perform the following steps:
1. Release the screws retaining the memory module slot cover.
Removing the screw retaining the memory module slot cover
Fig. 7
2. Unclip the memory module as shown in Fig. 8
3. Remove the memory module from its slot and put it aside.
NEC Versa M540/PB EasyNote R7 Disassembly Manual
Removing the memory module
Fig. 8
Removing the Battery) then
M2x3.5 Black
Page 8