NEC Generation N3000 M760s User Manual page 6

Class 1 laser products are not considered hazardous. The optical devices are designed such that there is
never human access to laser radiation above a Class 1 level during normal operation or prescribed
maintenance conditions.
The optical devices installed in your computer is designed for use solely as a component of such
electronic product and therefore does not comply with the appropriate requirements of Code of Federal
Regulation Sec. 1040.10 and Sec. 1040.11 for COMPLETE laser products.
Because exposure to laser radiation is extremely hazardous, under no circumstances should the user
attempt to disassemble the laser device.
Safety And Maintenance Precautions
1.
Read all of these instructions.
2.
Save these instructions for future use.
3.
Follow all warnings and instructions marked on the products.
4.
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
5.
Do not use this product near water.
6.
Do not place this product on an unstable surface. If the product should fall, it may become seriously
damaged and, more importantly, may cause injury to the user.
7.
This product should be operated from the type of power source indicated on the label. If you are not
sure of the type of power available, consult your dealer or local power company.
8.
Never push objects of any kind into this product through cabinet slots, as they may touch dangerous
voltage points or cause short circuits, risking the possibility of a fire or electric shock. Never spill
liquid of any kind onto the product.
9.
Do not attempt to service this product yourself. If you have the slightest suspicion that the product is
not in proper working order, unplug the unit and seek assistance from qualified service personnel,
especially under the following conditions:
•
When the power cord or plug is damaged or frayed.
•
If liquid has been spilled onto the product, or if the product has been exposed to water.
•
If the product has been dropped or the cabinet has been damaged.
•
If the product exhibits a distinct deterioration in performance, indicating a need for service.
If the product does not operate normally when the operating instructions are followed, adjust only those
controls that are covered by the operating instructions, since improper adjustment of other controls may
result in further damage or complications.
Power Supply, AC Adapter and Cables
AC Adapter
You must unplug the AC adapter cord to disconnect the equipment from the power supply. In that aim, the
socket-outlet should be installed near to the equipment and should be easily accessible.
© 2007-2009, NEC Computers S.A.S. All rights reserved.
Preface
6