Enerzone Destination 1.5 Installation And Operation Manual page 54

54
2. Starting with the rear tube, lean
and insert the right end of the
secondary air tube into the rear
right channel hole. Then lift and
insert the left end of the tube into
the rear left channel.
3. Align the notch in the left end of
the tube with the key of the left air
channel hole.
grip » hold the tube and lock it in
place by turning the tube as
shown.
reaches the end of the key way.
Repeat steps 2 and 3 for the
remaining tubes. Put back the bricks
in the same place.
To remove the tubes use the above
steps in reverse order.
Destination 1.5 Insert Installation and Operation Manual
Using a « Wise
Make sure the notch