Table of Contents
Advertisement
9.5 Chimney liner installation
1) Using a power driver with a Robertson end, secure the elbow (A) on the liner which has been
lowered into the chimney, using 3 self-piercing screws (B).
2) Slide the insert into the fireplace opening.
3) Attach the other end of the elbow on the insert's flue outlet.
4) If your masonry opening has just the
minimum dimensions required, it is possible
that you lack the space required to properly
attach the elbow to the insert's flue outlet.
In this case, it is possible to use our
AC02006 adapter (sold separately). This
adapter will allow you to access the liner
through the insert's combustion chamber
(the insert's baffle will need to be removed
prior to that).
Then, the liner can be
secured to the insert's flue outlet using a
screwless attachment system fixed to the
interior
of
the
chamber. See drawing on the right.
40
insert's
combustion
Destination 1.5 Insert Installation and Operation Manual
Advertisement
Table of Contents
