Cleaning The Chimney - Enerzone Destination 1.5 Installation And Operation Manual

5.2.3 Cleaning the Chimney

Chimney cleaning can be a difficult and
dangerous job. If
experience cleaning chimneys, you might
want to hire a professional chimney sweep
to clean and inspect the system for the first
time. After having seen the cleaning
process, you can decide if it is a job you
would like to take on.
The most common equipment used are
fibreglass rods with threaded fittings and
stiff plastic brushes. The brush is forced up
and down inside the chimney flue to scrub
off the creosote.
The chimney should be checked regularly
for creosote build-up.
cleaning of the chimney can be facilitated
by removing the baffle.
CAUTION: OPERATION OF YOUR DESTINATION 1.5 WITHOUT THE BAFFLE MAY CAUSE
UNSAFE AND HAZARDOUS TEMPERATURE CONDITIONS AND WILL VOID THE
WARRANTY.
NOTE: Before installing the firebrick, check to ensure that none are broken or damaged in any
way, and replace the damaged ones. Check the firebrick for damage at least annually and replace
any broken or damaged ones with new ones. Inspection and cleaning of the chimney is facilitated
by the removable baffle.
Destination 1.5 Insert Installation and Operation Manual
you don't have
Inspection and
27