Using The Wi-Fi Remote Commander - Sony PXW-X200 Operating Instructions Manual

Using the Wi-Fi Remote
Commander
When a Wi-Fi connection is established between
a device such as smartphone, tablet, PC, etc., and
the camcorder, the Wi-Fi remote commander
appears on the device screen and the device can
be used as a remote commander.
You can start/stop recording, adjust iris/focus/
zoom, etc., with a Wi-Fi connected device. This
function is useful for setting the camcorder in a
remote place, such as the top of a crane, etc.
Notes
• When iris is not set to auto, "IRIS" slider operation and
ON/OFF setting of "Auto IRIS" are not available.
• When the focus ring is pulled rearward, "FOCUS"
slider operation and ON/OFF setting of "Auto Focus"
are not available.
• When the ZOOM switch is set to MANUAL, "ZOOM"
slider operation is not available.
The displays of Wi-Fi remote commander
For smartphone
For Tablet
To display the Wi-Fi remote commander
To display the Wi-Fi remote commander on a
device screen, settings are required on both the
device and camcorder.
Camcorder settings
1
Set "Wi-Fi Remote" in "Network"
(page 109) of the OTHERS menu to
"On."
Device settings
Set the smartphone, tablet, PC, etc., to be used as
the Wi-Fi remote commander.
1
Make a Wi-Fi connection between the
device and camcorder (page 55).
2
Launch the browser and input http://
<camcorder's IP address> (refer to "IP
Address" in "Network" (page 109) of
the OTHERS menu)/rm.html.
Example: When the IP address is
192.168.1.10, input "http://192.168.1.10/
rm.html" in the address bar.
The Wi-Fi remote commander will appear on
the device screen when the Wi-Fi connection
is established.
Thereafter operate the camcorder as shown
on the screen of the Wi-Fi connected device.
The REC button becomes unavailable when
the Lock switch is dragged to the right.
Notes
• Depending on the device, the Wi-Fi remote
commander may not appear properly on the device's
screen even though you input "http://<camcorder's IP
address> (page 109)/rm.html" in the address bar. In
this case, input "rms.html" for a smartphone or
"rmt.html" for a tablet at the end of the address to
display the Wi-Fi remote commander properly.
• The Wi-Fi remote commander on the device's screen
may no longer match the actual status of the camcorder
Uploading a File 61