Using The Wi-Fi Remote Commander - Sony PMW-100 Operating Instructions Manual

Note
The configuration of items displayed in the Web
menu varies depending on the browser you are
using.
To display the Web menu
1
Launch a browser on the computer, and
navigate to "http://<camcorder's IP
address> (setting of OTHERS
>Network >IP Address in the setup
menu)".
Example (when the IP address is
"192.168.1.10"): Type "http://
192.168.1.10/" in the address bar.
If the connection is complete, a dialog
appears asking you to enter the user name
and password.
2
Enter the user name and password, and
click [OK].
User name: admin
Password: pmw-200 (Lower-case the model
name.)
To upload a planning metadata file
1
Insert a media such as an SxS memory
card.
2
Click "Upload" in the Web menu.
The Planning Metadata screen appears.
3
Click "Select" to show Choose File
dialog.
4
Select the planning metadata file you
want to upload, and then click "Open".
The path of the selected file appears.
5
Click "Execute".
The planning metadata file is loaded into the
camcorder's memory and stored in the
media.
"OK" appears in the Status field when the
transfer is complete.
Using the Wi-Fi Remote
Commander
When a Wi-Fi connection is established between
a device such as smartphone, tablet, PC, etc., and
the camcorder, the Wi-Fi remote commander
appears on the device screen and the device can
be used as a remote commander.
You can start/stop recording, adjust iris/focus/
zoom, etc., with a Wi-Fi connected device. This
function is useful for setting the camcorder in a
remote place, such as the top of a crane, etc.
The displays of Wi-Fi remote commander
For smartphone
For Tablet
Using a Wi-Fi Adapter (PMW-200 only) 35