Audio Set Menu - Sony PXW-X200 Operating Instructions Manual

AUDIO SET Menu

AUDIO SET
Menu items Subitems and setting values Contents
Audio Input CH3 Input Source
Internal / External
Setting for audio
inputs
[M]
CH4 Input Source
Internal / External
EXT MIC CH1 Ref
–70 dB / –60 dB / –50 dB /
–40 dB / –30 dB
EXT MIC CH2 Ref
–70 dB / –60 dB / –50 dB /
–40 dB / –30 dB
INT MIC Level
–12 dB / –6 dB / 0 dB / +6 dB /
+12 dB
Line Input Ref
+4dB / 0dB / –3dB / EBUL
Reference Level
–20dB / –18dB / –16dB /
–12dB / EBUL
Limiter Mode
Off / –6 dB / –9 dB / –12 dB /
–15 dB / –17 dB
AGC Spec
–6 dB / –9 dB / –12 dB /
–15 dB / –17 dB
Set the audio signal source to be recorded for CH3 for a 4-
channel recordable format.
Internal: Record the L side of the internal microphone for
CH3.
External: Record the AUDIO IN CH1 signal for CH3.
Set the audio signal source to be recorded for CH4 for a 4-
channel recordable format.
Internal: Record the R side of the internal microphone for
CH4.
External: Record the AUDIO IN CH2 signal for CH4.
Select the reference input level for when an external
microphone is connected to the AUDIO IN CH-1 connector
and that signal is being used for the audio signal source for
CH1 or CH3. This can be selected regardless of the setting of
the AUDIO SELECT switch.
Note
This is unavailable when the AUDIO IN CH-1 switch is set to
INT and "CH3 Input Source" is set to "Internal." This is also
unavailable when the CH-1 input (LINE/MIC/MIC+48V)
switch is set to LINE.
Select the reference input level for when an external
microphone is connected to the AUDIO IN CH-2 connector
and that signal is being used for the audio signal source for
CH2 or CH4. This can be selected regardless of the setting of
the AUDIO SELECT switch.
Note
This is unavailable when the AUDIO IN CH-2 switch is set to
INT and "CH4 Input Source" is set to "Internal." This is also
unavailable when the CH-2 input (LINE/MIC/MIC+48V)
switch is set to LINE.
Select the internal microphone level. This can be selected
regardless of the AUDIO SELECT switch setting.
Select the reference input level for when the AUDIO IN CH-
1/CH-2 connectors are set to LINE.
Select the 1kHz test signal output level.
Select whether to activate the limiter when a loud signal is
input while the AUDIO SELECT switch is set to MANU
(manual).
Select the audio input level AGC.
Setup Menu List 91